220V DIY Using Heat Gun Electric Power Tool Hot Air 300W Temperature Gun With Seat Shrink Plastic EU Plug
- — 12 months warranty
- — SMS notification
- — Return and exchange
- — Different payment methods
- — Best price
220V DIY Using Heat Gun Electric Power Tool Hot Air 300W Temperature Gun With Seat Shrink Plastic EU Plug
220V EU plug
HOT AIR GUN
model No: LS-300
Rated Voltage: 220v
Rated Frequency: 50-60HZ
Rated Power input: 220V
PLUG:EU
HOW TO USE THE HEAT TOOL
1.Plug in the heat tool
2.Hold the product as shown on the pict .... Do not touch the hot nozzle
3. Keep 5-6cm distance between the heat tool and item
4.Do not use more than 2-3minutes continuosly to prevent overheated
Note: The hot air gun child with caution Please minor children in the safe use of hot air gun under the guidance of an adult to accompany!
Heat Gun Boot time not too long, to avoid burn out the machine!
Attention:
1. Do not blow the hot air gun directly at 90° to the object
2. The recommended distance between the air outlet of the heat gun and the heating item is 5-6 cm
3. The single use time of the heat gun should not be too long, usually 2-3 minutes. If the temperature of the fuselage increases significantly, please close the heat gun and wait for cooling before using it
4. The temperature of the hot air gun can only reach about 200°C, which can not be used in industrial aspects such as disassembly and welding of small iron sheet components and patch integrated circuits
No reviews found
